3D printing continues to push beyond the “prototype.”
3D printer manufacturer Objet has created this 3D printed folding stool to demonstrate that a 3D printer can make a product equivalent to a traditionally manufactured one. It was printed in one piece in the folded up position out of what they describe as “ABS-like plastic.” It is 48 cm (19 inches) high and can support up to 100 kg (220 lbs).
While Objet does not claim that this stool is the first folding stool printed in one piece, I still feel obliged to mention that there is a predecessor to this project. Freedom of Creation made the One Shot Stool back in 2008.
Via thinq_
Posted in 3D Printing, Furniture + Lighting, Taylor Gilbert by Taylor Gilbert | Comments are off for this post
Make your own stuff using: 3D Printing
-
-
-
-
Say that 5 times fast . . .
Every once in a while someone does a project that raises the bar for the rest of us. This is one of those projects. Webca from Thingiverse 3D printed the CUBE 3D printer piece by piece over 8+ months, using over 15 lbs of ABS plastic in the process. Oh, did I mention he printed it on a 3D printed Makerbot he made before? It’s not the fastest or cheapest way to make a 3D printer ($3000), but that doesn’t mean it’s not awesome.
(more…)
Posted in 3D Printing, Maker Movement, Taylor Gilbert by Taylor Gilbert | Comments are off for this post
Make your own stuff using: 3D Printing
-
-
-
-
Exploring the relationship between process and end result
Machines that can draw have certain magic to them that is quite different to when one watches mere humans producing works of art.
We all know that machines are destined to take over the world, but through the explorations of Jesse Houlding we can prepare for a more cultured mechanical future thanks to his remarkable range of kinetic drawing machines.
The images are produced when magnetic components move behind the paper, on which iron filings have been sprinkled.
The iron filings make different marks based on the strength of the magnetic field that holds them in place.
Blurring the boundaries of what separates a sculpture from other mediums, the Ferrous Wheel (what a great name!) is both a sculpture in its own right and a producer of new artwork.
You can see video of this contraption in action as well as Jesse’s other machines on his YouTube channel.
Jesse Houlding via Colossal
Posted in Art, Functional Art + Objects, Guy Blashki by Guy Blashki | Comments are off for this post
-
-
-
-
A really bright smile
Over 60 Italian creatives got together for some beer-fueled product designing at Design Smash Milan.
The event (part of WeFab during Milan Design Week) was sponsored by our Milano amici / fabbing partners Vectorealism, and all designs had to be fabricated with laser cutting.
The design theme was “Things I Need to Work” and 15 finished projects were presented including: a laptop organizer, a rotating stand for the iPhone, a task lamp, stationery accessories, and even a desktop hydroponics system.
Designer Marco Magni created this pop art lip lamp. Part-Lichtenstein, part-Rocky Horror, this lighting design is definitely not something you’d find at your local big box.
And you can make your very own luscious lip lamp with your Personal Factory. Plans for Marco’s designs are available for free download right HERE.
via Vectorealism
Posted in Events, Furniture + Lighting, Kristen Turner, Laser Cutting, Maker Stories by Kristen Turner | Comments are off for this post
Make your own stuff using: Laser Cutting
-
-
-
-
The Laser Cutter Roundup — a weekly dose of laser-cut love: #38
Hey, Sam here. I’m back collecting this week’s posts from The Laser Cutter.
Above Laser perforated anodized aluminum panels by architects Skidmore, Owings & Merrill. Read more at Architectural Record. Courtesy of Captain Tenneal.
After the jump, a trip to Miami Beach, a funicular, feathers, and a stencil… (more…)
Posted in Laser Cutting, Sam Tanis by Sam | Comments are off for this post
Make your own stuff using: Laser Cutting
-
-
-
-
Stretchy connected modules turn everything into an interactive robot
Think of the possibilities if the structural components for your very own robot came from whatever you have lying around. Everything is fair game when Gabriel Paciornik’s Plick robot enabler enters the scene.
Plick is the culmination of Gabriel’s studies in Industrial Design at Shenkar College, Israel. Working in partnership with the miLab of the IDC Hertzlia, the project integrates product design, electronics, programming, and prototyping.
Although there is some clever stuff going on inside the modules, it is the learn-through-play aspect of the finished product that really sets Plick apart.
Sensors can be connected to many actuators, and actuators can be connected to many sensors. This way many complex behaviors can be achieved with no programming, and by trial and error learning.
Click through for a short video of Plick in action. (more…)
Posted in 3D Printing, Electronics + Robotics, Guy Blashki, Programming, Toys + Games by Guy Blashki | Comments are off for this post
Make your own stuff using: 3D Printing
-
-
-
-
July brings more goodies for Arduino
Where would the DIY scene be without Arduino? That nifty little all-in-wonder has lifted the stakes once again, with two fantastic new additions to the open source hardware platform that runs so many of our favorite creations.
The first feature that’s got more than a few makers excited is an onboard Ethernet jack. This added connectivity is likely to empower a whole new generation of web-enabled devices, and there is even an optional PoE (Power over Ethernet) module to further reduce cable clutter and get all your hardware talking.
Our second noteworthy addition is a board for the Android Open Accessory Development Kit, an add-on that allows Arduino powered devices to become a part of the Google juggernaut via any Android device when in “accessory mode”.
Both of these are available for purchase now, either bundled together in kit form or as individual modules. Pair them up with some Ponoko laser cutting or 3d printing, and there are sure to be fun times ahead.
via Engadget
Posted in Electronics + Robotics, Guy Blashki, Programming, Technology by Guy Blashki | Comments are off for this post
-
-
-
-
Who needs laser eye surgery when there’s a new startup with custom 3D print glass frame service?
Glasses are, if nothing else, a geek status symbol – definitive proof that you’ve done enough all-nighters staring into textbooks, crafting code or generating geometry on computer screens to have blured your vision permanently. Anyone who’s spent time at the optometrist will know it’s tough to select the perfect pair of frames… Fortunately OYO’s 3d print app is set to appear in the cloud soon for a private beta test programme. (more…)
Posted in David McGahan, Fashion + Textiles, Maker Movement, Mass Customization, Tools + Apps by David McGahan | Comments are off for this post
Make your own stuff using: App Gateway
-
-
-
-
I’ve got you wrapped around my finger
Silver Profile turns the distinctive outline of your own profile into a custom made ring. It’s a cool idea for a piece of totally wearable jewelry that’s also totally unique.
The process is simple. You send in a photo of your profile and specify a ring size. And in 10-15 days, you receive a custom, polished silver ring.
Rings are a flat rate of $189 no matter what size or shape.
Other precious metals are available upon request. Contact Silver Profile for pricing and details. Gold profile wedding bands anyone?
Posted in Jewellery, Kristen Turner, Mass Customization by Kristen Turner | Comments are off for this post
-
-
-
-
diy CNC kit for $300 raises $8,950 and counting
It’s been almost one month since Illinois based maker Edward Ford launched his Kickstarter campaign to perfect his self-built CNC mill and come up with a complete CNC mill kit for under $300.
We loved the idea of what would really be the most affordable hobbyist CNC mill ever, so Ponoko decided to support this one from the get-go.
Ed’s goal was to raise $1,500; but thanks to over 100 backers, the ShapeOko has raised just under $9,000. And we’ve still got 3 days left to go.
There are a lot of diy CNC mill kits out there, but one of the best things about this one (besides the price) is that it’s as open-source as you can get.
(more…)
Posted in CNC Routing, Hardware by Ponoko Team | Comments are off for this post
Make your own stuff using: CNC Routing
-
-
-
-
RSS Feed
follow
like
see
watch
Submit
